Singer 750 Sewing Machine Instruction Manual
$4.99
This is a download manual. Please check your email after purchasing.
Description
Singer 750 Sewing Machine Instruction Manual.
Includes:
Threading machine.
Changing bobbins.
Choosing needle and thread.
Threading needle.
Dial settings.
Sewing a seam.
Embroidery.
Fashion plus Flexi-disks.
Buttons and buttonholes.
Chain-stitching.
Sewing knit and stitch fabric.
Zippers.
Free-motion stitching.
Decorative twin-needle stitching.
Cleaning machine.
Accessories.
Removal of covers, bulbs.
Performance checklist.
Much more!
82 page instruction manual.
Model: Singer 750 Touch and sew.
Singer 750 Golden Touch & Sew
Winding the bobbin – Singer 750 Sewing Machine Instruction Manual
The push-button bobbin will make your sewing go faster than ever before whether you are using a lot of one kind of thread or small quantities of different threads, as you are likely to do when mending or darning.
You will find a bobbin in place under the slide plate of your machine. (To open the slide plate simply slide it gently toward you). If the bobbin runs out of the thread while you are sewing, you can rewind it without removing it from the machine.
Preparation steps
Make sure buttonhole dial is in OFF position.
1. Use general-purpose, special-purpose, or straight stitch presser foot.
2. Raise presser foot to release tension on the thread, and raise the needle to its highest position. Make sure your needle is larger than a size 9.
3. Open slide plate and make sure bobbin is empty.
4. Set needle position and stitch width dials at straight stitch settings indicated by symbols.
Winding steps
1. Press bobbin and push button to the left to engage it in Winding position.
2. Wrap thread around presser foot screw, and hold of thread firmly.
3. Start the Machine.
Run the machine at a moderate speed.
Pull thread end away after a few coils have been wound.
Keep your eye on the bobbin as it fills.
Do not allow thread to wind beyond on the outside FULL ring.
4. Close slide plate to release push button to sewing position.